First, unzip the downloaded zip file and put it where you want to put it.
Open Steam and find FaceRig in your library. Right-click on it and choose Manage > Browse Local Files.
The FaceRig folder will open.
Open Bin>Tools>ImportWizardNew>ImportWizard.exe
Select “Yes” when the Windows warning appears.
When this window appears, select ModelImporter.
When this screen is displayed, open the Import Type on the upper left and select Generic Prop.
Next, press the Browse button in the Data Folder column and select the file you just unzipped.
When it has been loaded, press Import in the lower right corner.
When Success! is displayed, click OK and close all windows.
Launch FaceRig and press Change to Advanced UI on the far right side of the menu above.
Select avatar in the right side menu, select the Prop tab and press the Add Prop button.
Custom props are shown in ? mark.
When you select an icon, the name of the prop appears at the top.
The Bone link allows you to choose where to put the prop.
Selecting Head for hats and sunglasses and Jaw for candy and pacifiers should work well linked together.
Click Atouch to equip it.
If you scroll down, there is a bar that allows you to adjust the position of the prop, so you can fine-tune the position there.
When you are ready to make adjustments, you can use the save button in the lower right hand corner to create a file to save the position of the prop. It is recommended that you save the file in a location that is easy to find.
You can load the adjusted data by selecting the save file using the load button in the lower left corner.
If you want to add a second or third prop, you can equip more by pressing the Add Prop button in the top left corner.
If you have any questions, please contact us on Twitter or in the comments.